ISO 10816-6 (1st Edition, 1995)

Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 6 : Reciprocating machines with power ratings above 100kW

 

ISO 10816-6은 아래 해당하는 기계의 Site에서 측정된 진동값의 평가에 적용하며, 규격에서 제시하는 위치에서 측정된 진동을 RMS 단위로 평가하는데 이용한다.

 

●  It generally applies to reciprocating piston machines mounted either rigidly or resiliently with power  ratings of above 100 kW. Typical examples of application are : marine propulsion engines,

marine auxiliary engines, engines operating in diesel generator sets, gas compressors and engines for

diesel locomotives.

 

 

1. 진동 평가 기준

[ ISO 10816-6, Vibration Limit ]

○ Zone A : Newly commissioned machine

○ Zone B : This zone is considered as acceptable level for unrestricted long-term operation

○ Zone C : Normally considered unsatisfactory for long-term operation

○ Zone D : Normally considered to be sufficient severity to cause mechanical damage

○ 산업용 및 선박용 디젤 엔진은 5, 6, 7 정도로 분류됨.

 

 

2. 진동 측정 위치

[ ISO 10816-6, Vertical in-line machine 측정 위치 ]

 

[ ISO 10816-6, Multi-cylinder Vee machine(좌), Horizontal opposed machine(우) 측정위치 ]

 

 

※ ISO 기준 더 보기

 

ISO 20816-1 (1st Edition, 2016)

ISO 20816-2 (1st Edition, 2017)

ISO 10816-3 (2nd Edition, 2009)

ISO 10816-4 (2nd Edition, 2009)

ISO 10816-5 (1st Edition, 2000)

 

 

▷ (주)이너턴스 업무 소개 - 왕복동압축기(Reciprocating Compressor)

왕복동 압축기의 맥동분석(Pulsation study for Reciprocating Compressor)

 

 

---

기계진동 관련 문의사항은 02-707-1545

또는 admin@inertance.com 으로 연락주시면 성실히 수행토록 하겠습니다.

주식회사 이너턴스

---