ISO 20816-1 (1st Edition, 2016)
Mechanical vibration - Evaluation of machine vibration by measurements on rotating and non-rotating - Part 1: General guidelines
ISO 20816-1은 site에서 회전기계의 Shaft, Bearing Housing 등의 Rotating part 및 Non-rotating part의 진동 평가를 위한 General Guideline입니다. Equipment 종류에 따른 진동 기준치 및 측정 위치는 ISO 10816, 20816, 7919의 세부 규격서를 따릅니다.
ISO 20816-1 (1st Edition, 2016)은 아래 ISO 규격서에 대한 통합 및 개정판으로 해당 규격서의 내용을 삭제 및 대체합니다.
① ISO 7919-1:1996
② ISO 10816-1:1995
③ ISO 10816:1995/Amd 1:2009
ISO 10816, 20816, 7919의 적용범위를 넘어서거나 International Standards를 적용할 수 없는 Different classes of machinery에 대한 Criteria Evaluation(단위, 진동속도, RMS, mm/s) 은 아래 조건을 따릅니다.
➤ 일반적으로 각각의 Zone Boundary 경계에 대해서는 아래와 같이 구분하여 적용한다.
○ Small Machines (e.g. electric motors with power up to 15kW)의 경우, range의
하부 영역에 위치한다.
○ Large Machines (e.g. prime movers with flexible supports in the direction of
measurement)의 경우 range의 상부 영역에 위치한다.
➤ 한편, 개별 Zone Boundary 경계에 대한 평가는 다음과 같이 적용한다.
○ Zone A: The vibration of newly commissioned machines normally falls within this zone
○ Zone B: Machines with vibration within this zone are normally considered acceptable for
unrestricted long-term operation.
○ Zone C: Machines with vibration within this zone are normally considered unsatisfactory
for long-term continuous operation. Generally, the machine may be operated for a limited
period in this condition until a suitable opportunity arises for remedial action.
○ Zone D: Vibration values within this zone are normally considered to be of sufficient severity
to cause damage to the machine.
아래 그림에서는 일반적인 회전기계 진동의 Non-Ritating part에 대한 ISO 20816-1 규격의 적용 예시를 나타내고 있습니다.
진동 측정, 진동 분석, 진동 해결, 설계 검토 - (주)이너턴스
이너턴스(INERTANCE)에서는 높은 진동이 발생하는 플랜트 회전기계(Rotating Equipment), 구조물(Structure), 배관 등에 대한 진동 측정(Vibration Measurement)을 수행하고 있습니다.
kor.inertance.com
기계진동 관련 문의사항은 02-707-1545
또는 admin@inertance.com 으로 연락주시면 성실히 수행토록 하겠습니다.
주식회사 이너턴스